Mon-Fri: 7AM-7PM, Sat: 8AM-5PM Licensed & Insured [email protected] Serving all of Maryland

Sidewalk & Walkway Cleaning for Concrete in Maryland

Pressure wash with a surface cleaner for concrete. Walkway, front path and sidewalk cleaning that removes slippery growth, gum and grime. Typical cost $100-$250.

Looking for sidewalk & walkway cleaning for concrete in Maryland? We look at the surface first, choose the right method and pressure for it, and give you a price before any work starts. On concrete, the method we use is pressure wash with a surface cleaner.

The right method for the job

Pressure wash with a surface cleanerCleaning method
Usually 2,500-3,500 PSI with a rotary surface cleaner for even resultsPressure

Cleaning solution: A degreaser for oil spots and a pre-treatment for organic growth; post-treatment slows regrowth.

Caring for concrete

Plain broom-finish concrete is the surface pressure washing is made for. A rotary surface cleaner gives an even finish without the stripes a wand leaves, and hot water helps with grease and oil.

Avoid: Holding a narrow tip close to the surface, which etches lines into the cream layer of the concrete.

How often: Every year, or every 6 months in shaded, damp spots.

Is it time for sidewalk & walkway cleaning for concrete?

  • Slippery paths after rain
  • Green or black growth along shaded edges
  • Gum, leaf stains or rust spots
  • Uneven, blotchy color

Why it gets dirty

  • Shade and moisture along the house
  • Foot traffic and dropped food or gum
  • Leaves and berries that stain
  • Sprinkler overspray

Easy upkeep between cleanings

  • Sweep away leaves before they stain
  • Scrub small slippery patches with a stiff brush and a deck or patio cleaner
  • Trim plants that keep paths shaded and damp

Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.

Why more pressure isn’t better

  • Slipping on wet, treated surfaces
  • Water and debris sprayed onto doors, windows and cars
  • Lifting loose joint material between slabs

Our process for sidewalk & walkway cleaning for concrete

  1. Sweep and inspect
  2. Pre-treat growth and stains
  3. Clean with a surface cleaner
  4. Detail edges and steps
  5. Rinse and post-treat

Sidewalk & Walkway Cleaning for Concrete cost in Maryland

$100-$250Typical range for a typical front walk and side paths
About 1 hourTypical time on site
Once a yearRecommended frequency

What moves the price:

  • Size: square footage of siding, roof or flatwork
  • Condition: heavy growth, old stains and peeling finishes take longer
  • Access: number of stories, roof pitch, slopes and how close we can park
  • Add-ons: sealing, gutter brightening and other services done in the same trip

These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.

Other services for concrete

Sidewalk & Walkway Cleaning for Concrete in Maryland

In Maryland, concrete has to deal with summer mildew and winter salt and freeze-thaw cycles. Annual cleaning and a sealer every few years help it last.

We cover 319 cities and towns across Maryland. Find sidewalk & walkway cleaning for concrete in your city:

Sidewalk & Walkway Cleaning for Concrete: frequently asked questions

How much does sidewalk & walkway cleaning for concrete cost in Maryland?

Sidewalk & Walkway Cleaning for Concrete typically costs $100-$250 for a typical front walk and side paths, and usually takes About 1 hour. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.

Do you use high pressure for sidewalk & walkway cleaning for concrete?

For concrete: usually 2,500-3,500 PSI with a rotary surface cleaner for even results. What we avoid: holding a narrow tip close to the surface, which etches lines into the cream layer of the concrete. We keep the pressure even and controlled, with the right tools for the surface.

Is sidewalk & walkway cleaning for concrete safe for my plants and pets?

We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.

How often should I schedule sidewalk & walkway cleaning for concrete?

Every year, or every 6 months in shaded, damp spots. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.

What if it rains on the day?

Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.

More services

Popular Exterior Cleaning Services in Maryland

Exterior Mold & Mildew Removal for Concrete

Pressure wash with a surface cleaner. Plain broom-finish concrete is the surface pressure washing is made for.

Typical $250-$700

Solar Panel Cleaning

Gentle solar panel cleaning with soft brushes and purified water, never pressure washing.

Typical $150-$350

Brick Cleaning

Brick cleaning for walls, chimneys, steps and patios that removes algae, dirt and efflorescence without eroding mortar.

Typical $250-$700

Soft Washing for Stone & Stone Veneer

Low-pressure wash. Natural stone and manufactured stone veneer vary a lot.

Typical $300-$800

Rust Stain Removal for Stucco

Soft wash. Traditional stucco is porous and holds moisture, which is why it streaks green and black in humid and shaded spots.

Typical $150-$500

Rust Stain Removal for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $150-$500

Patio Cleaning for Stamped Concrete

Moderate-pressure wash. Stamped and colored concrete is usually protected by a sealer.

Typical $150-$400

Parking Lot & Garage Cleaning

Cleaning parking garages, lots and loading areas to remove oil, grime, gum and litter.

Typical $500-$3,000

HOA & Apartment Pressure Washing

Building washing, sidewalks, breezeways, pools and amenity areas for HOAs, apartments and condos.

Typical $800-$5,000

Concrete Sealing for Exposed Aggregate

Moderate-pressure wash. Exposed aggregate concrete has stones showing at the surface.

Typical $400-$1,200

Exterior Mold & Mildew Removal

Killing and removing mold, mildew and algae from siding, decks, walkways and fences, with treatment that slows regrowth.

Typical $250-$700

Patio Cleaning for Travertine

Low-pressure wash. Travertine is a natural limestone popular around pools.

Typical $150-$400

Ready for a cleaner home or business?

Get a free pressure washing quote in Maryland. Tell us what needs cleaning and we'll give you a price and the next available date.

Call NowFree Quote